Insulated piercing connector

  • JJCD/JJCD10  insulation piercing grounding clamp

    JJCD/JJCD10 insulation piercing grounding clamp

    High Voltage 10kV two bolts Insulation Piercing Connector with Grounding rings for Earthing Protection

    Description

    10kv two bolts insulation piercing connector with Earthing Ring for Earthing Protection and Temporary Electrical Inspection.It is suitable for majority types of  ABC conductors as well as connections to service and lighting cable cores. When tightening the bolts, the teeth of the contact plates penetrate the insulation and establish a perfect contact. The bolts are tightened until the heads shear off. Tightening torque guaranteed(fuse nut). Stripping of insulation is avoided.

    Service condition: 400/600V, 50/60Hz, -10°C to 55°C

    Standard: IEC 61284, EN 50483, IRAM2435, NFC33 020.

    Suitable for Aluminum and copper conductors

  • 1KV 10KV insulation piercing clamp

    1KV 10KV insulation piercing clamp

    Insulation Piercing Connector IPC connector is suitable for aluminum and copper conductors and components not losable, end cap attached to body, Insulation material made of weather resistant glass fiber reinforced polymer, contact teeth made of tinned brass or copper or aluminum, bolt made of dacromet steel. When tightening the bolts, the teeth of the contact plates penetrate the insulation and establish a perfect contact. The bolts are tightened until the heads shear off. Stripping of insulation is avoided.

  • TTD Insulated piercing connector (fire resistance)

    TTD Insulated piercing connector (fire resistance)

    The connector was use for contact live or dead line work, and the main& tap line was all for insulated Aluminum or Copper conductor. The connector withstanding 6kV flashover under the water. Its insulating body is highly climatic and mechanically resistant.

    It was easy to install and safe to use. The simultaneous insulation piercing on main and tap, the tightening screws was made of Dacromet steel. Protection against water in shunted cable by tightness joined and insulating end caps. The branch can be on the left or on the right.

    To install easily one bolt connectors with high tightening torque.

     

  • 1kV four-core piercing connector (cable connection ring)

    1kV four-core piercing connector (cable connection ring)

    The four-core piercing connector is mainly suitable for branching of high-current main lines. There is no need to strip the main cable insulation. One connector can quickly branch four branch lines at the same time, and it takes almost no space. It uses cast aluminum as the shell. Extremely high ultimate strength, reusable, and its overall performance is superior to cable piercing branch clamps.